How To Build A Floating Wall With Metal Studs

By | May 29, 2024

How To Build a Floating Wall With Metal Studs

A floating wall is a partition wall that is not attached to the floor or ceiling. It is an excellent way to divide a room without making it feel smaller. In addition, floating walls can be used to create unique architectural features, such as niches and display shelves. This guide will provide you with the necessary steps to build a floating wall with metal studs.

### Materials

You will need the following materials to build a floating wall with metal studs:

  • Metal studs
  • Track
  • Drywall
  • Drywall screws
  • Tape
  • Joint compound
  • Sandpaper
  • Paint or primer
### Tools

You will need the following tools to build a floating wall with metal studs:

  • Stud finder
  • Level
  • Measuring tape
  • Saw
  • Drill
  • Screwdriver
  • Hammer
  • Putty knife
  • Sponge
### Instructions

Follow these instructions to build a floating wall with metal studs:

1.

Find the location of the floating wall.

Use a stud finder to locate the studs in the wall where you want to install the floating wall. Mark the location of the studs on the wall. 2.

Install the track.

Cut the track to the length of the floating wall. Hold the track against the ceiling and screw it into the studs using drywall screws. 3.

Cut the metal studs.

Cut the metal studs to the height of the floating wall. Leave a 1/2-inch gap between the bottom of the studs and the floor. 4.

Insert the metal studs into the track.

Insert the metal studs into the track and screw them in place. 5.

Install the drywall.

Cut the drywall to the size of the floating wall. Screw the drywall to the metal studs using drywall screws. 6.

Tape and joint the drywall.

Tape and joint the drywall seams using joint compound. 7.

Sand the drywall.

Sand the drywall smooth using sandpaper. 8.

Paint or prime the drywall.

Paint or prime the drywall to match the rest of the room. ### Tips

Here are a few tips for building a floating wall with metal studs:

  • Use a level to make sure that the floating wall is level both horizontally and vertically.
  • Leave a 1/2-inch gap between the bottom of the metal studs and the floor to allow for expansion and contraction.
  • Tape and joint the drywall seams carefully to prevent cracks from developing.
  • Sand the drywall smooth before painting or priming.
  • Paint or prime the drywall to match the rest of the room.


How To Build A Metal Stud Wall

How To Build A Metal Stud Wall

Framing Basement Walls How To Build

Framing Basement Walls How To Build Floating

Floating Basement Walls

Floating Partition Walls Basement Asktooltalk Com

Wall Hung Sink On A Steel Stud

Mounting A Wall Hung Sink On Steel Stud Jlc

Framing Basement Walls How To Build

Framing Basement Walls How To Build Floating

How To Install A Floating Wall System

How To Install A Floating Wall System

Floating Wall Shelves They Only Look

Floating Wall Shelves They Only Look Simple Life Of An Architect

Hd1052 Twin Metal Stud Wall

Hd1052 Twin Metal Stud Wall Soundproofing Solution

Metal Stud Framed House Complete

Metal Stud Framed House Complete

Metal Stud House Basement Framing

Metal Stud House Basement Framing


Leave a Reply

Your email address will not be published. Required fields are marked *